FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 729 (On-Board Diagnostic [Engine Control System]) › On-Board Diagnostic Test › Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Record the freeze frame PID data using the WDS or equivalent.
    Fig 1: Identifying DLC-2 Connector Location
    G00974364Courtesy of MAZDA MOTORS CORP.
About FixVault