FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 809 (Seat System) › Repair Instructions › Heated Seat Switch Replacement - Front › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat heater switch assembly to the front trim panel by pressing the switch into place until the switch is completely seated.
  2. Connect the electrical connector to the front seat heater switch assembly.
  3. Install the front trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE FRONT DOOR in REPAIR INSTRUCTIONS in Doors.
    Fig 1: Installing Front Seat Heater Switch Assembly
    G01459202Courtesy of GENERAL MOTORS CORP.
About FixVault