Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connection.
Install the electronic display module (2) to the overhead console (3).
Install the display lens (1) by snapping the lens into place.
Calibrate the compass. Refer to ELECTRONIC COMPASS CALIBRATION .

Fig 1: Installing Electronic Display Module To Console
Courtesy of GENERAL MOTORS CORP.