FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 943 (Engine Controls - 6.6L (Lb7) (Introduction)) › Repair Instructions › Air Cleaner Element Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the air filter element into the lower air cleaner housing.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the upper housing cover and tighten the screws.

    Tighten:  Tighten the screws to 4 N.m (35 lb in).

    3. Fig 1: Air Cleaner Housing & Filter Element
    GM858229Courtesy of GENERAL MOTORS CORP.
  3. Connect the MAF/IAT sensor electrical connector (1).
    4. Fig 2: MAF/IAT Sensor Electrical Connector
    GM877698Courtesy of GENERAL MOTORS CORP.
About FixVault