FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 945 (Engine Controls - 4.3L (Introduction)) › Repair Instructions › Fuel Hose/Pipes Assembly Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the caps from the fuel feed/return and EVAP pipes.
  2. Install and connect the fuel feed (3) and return (2) pipes to the sending unit and retaining clips.
    3. Fig 1: View Of EVAP Pipe, Fuel Feed & Return
    GM815641Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
About FixVault