FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 950 (Seat System) › Repair Instructions › Seat Back Frame Replacement - Rear › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat-back frame (4) to the seat cushion frame.
    2. Fig 1: Installing Rear Seat Back Frame
    GM276335Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts which retain the seat-back frame to the seat cushion frame.

    Tighten:  Tighten the bolts to 35 N.m (26 lb ft).

  3. Install the seat-back cover. Refer to Seat Back Cover and Pad Replacement - Rear .
  4. Install the armrest to the seat back. Refer to Armrest Replacement - Rear Seat (60/40 Split) .
  5. Install the seat to the vehicle. Refer to Seat Replacement - Rear (Extended Cab w/4th Door) , Seat Replacement - Rear (Extended Cab)  or Seat Replacement - Rear (60/40 Split) .
About FixVault