Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Aligning Air Dryer For Removal/Installation

Courtesy of GENERAL MOTORS CORP.

Install the air dryer (1) to the compressor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 2: Automatic Level Control Air Dryer Mounting Screw

Courtesy of GENERAL MOTORS CORP.

Install the air dryer mounting screw (1).
Tighten: Tighten the screw to 6 N.m (53 lb in).

Fig 3: Air Dryer Hose

Courtesy of GENERAL MOTORS CORP.

Install the hose (1) onto the air dryer (2).
Lower the vehicle.