FixVault
Home › Pontiac › 2001 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 1188 (Data Link Communication System) › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the data link connector into position.
    NOTE: Refer to FASTENER NOTICE
  2. Install the bolts/screws to the data link connector.

    Tighten 

    Tighten the bolts/screws to 2 N.m (18 lb in).

    Fig 1: Installing Data Link Connector And Screws
    G01726421Courtesy of GENERAL MOTORS CORP.
About FixVault