FixVault

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the washer solvent from the washer solvent container.
  2. Remove the front fender liner. Refer to FRONT FENDER LINER REPLACEMENT in Body Front End.
  3. Disconnect the washer pump electrical connector.
  4. Disconnect the washer pump hose.
  5. Using a small flat-bladed tool, remove the washer pump from the washer solvent container.
  6. Using a small flat-bladed tool, remove the seal from the washer solvent container.
    Fig 1: Disconnecting Washer Pump Electrical Connector
    G01503334Courtesy of GENERAL MOTORS CORP.