FixVault
Home › Pontiac › 2001 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 1247 (Instrument Panel, Gauges & Console) › Repair Instructions › Head Up Display Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heads up display module.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts that secure the heads up display module to the IP.

    Tighten 

    Tighten the bolts to 2 N.m (18 lb in).

  3. Connect the electrical connectors.
  4. Install the IP upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek)  or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) .
    Fig 1: Installing Heads Up Display Module, Electrical Connectors, And Bolts
    G01721728Courtesy of GENERAL MOTORS CORP.
About FixVault