Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connectors to the switch.

Fig 1: Connecting Driver Information Center Switch Electrical Connectors
Courtesy of GENERAL MOTORS CORP.
Install the driver information center switch to the IP trim plate.
Push the switch assembly to the IP trim plate until the assembly is fully seated.

Fig 2: Installing Driver Information Center Switch To IP Trim Plate
Courtesy of GENERAL MOTORS CORP.