Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
Remove the tire and wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .

Fig 1: Using J 35917 To Press Wheel Stud From Bearing/Hub
Courtesy of GENERAL MOTORS CORP.
Remove the brake rotor. Refer to BRAKE ROTOR .
Use the J 35917 in order to press the wheel stud (1) from the bearing/hub (2).