Setup for Component Replacement
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, the CKP Variation Learn Procedure must be performed:
- Engine replacement
- Any engine repair that disturbs the CKP sensor or its relationship with the crankshaft reluctor wheel
- CKP sensor
Refer to the following:
- Crankshaft Position System Variation Learn for the 2.4L engine
- Crankshaft Position System Variation Learn for the 3.5L engine
- Crankshaft Position System Variation Learn for the 3.6L engine
- Crankshaft Position System Variation Learn
for the 3.6L Hybrid
- If the throttle body is replaced or a throttle body cleaning procedure is completed, the Throttle/Idle Learn Procedure must be performed. Refer to the following:
- Throttle/Idle Learn for the 2.4L engine
- Throttle/Idle Learn for the 3.5L engine
- Throttle/Idle Learn for the 3.6L engine
- Throttle/Idle Learn for the 3.6L Hybrid