FixVault
Home › Pontiac › 2001 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 607 (Rear Wheel Steering System) › Repair Instructions › Steering Gear Protection Shield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the steering gear protection shield to the steering gear.
  2. Install the steering gear protection shield retaining bolts (3) to the steering gear. Tighten the bolts to 180 N.m (132 ft lbs).
  3. Lower the vehicle.
  4. Perform a four wheel alignment. Refer to SPECIFICATIONS .
About FixVault