FixVault
Home › Pontiac › 2001 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 71 (Automatic Transaxle Servicing) › Removal & Installation › Transaxle Mount Assembly (Front) › Installation

Transaxle Mount Assembly (Front): Installation

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front transaxle mount and install the bolts. Tighten the bolts to specification. See TORQUE SPECIFICATIONS .
  2. Position the lower transaxle mount bracket and install the bolts. Tighten to specification. See TORQUE SPECIFICATIONS .
  3. Install the transaxle mount-through bolt. Tighten to specification. See TORQUE SPECIFICATIONS .
  4. Remove the jackstand and the wood block. Lower the vehicle.
About FixVault