FixVault
Home › Pontiac › 2001 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 962 (HVAC Systems - Automatic) › Repair Instructions › Blower Motor Control Processor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped, remove the sound insulator panel. Refer to Insulator Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector at the blower motor.
    Fig 1: View Of Electrical Connector At The Blower Motor
    GM476821Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (4) from the blower motor control processor (2).
    Fig 2: Blower Motor Control Processor
    GM735938Courtesy of GENERAL MOTORS CORP.
  4. Remove the blower motor control processor retaining screws (3) from the HVAC module (1).
  5. Remove the blower motor control processor (2) from the HVAC module (1).
About FixVault