Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the recirculation actuator.
- Install the recirculation actuator retaining screws.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
- Connect the electrical connector to the recirculation actuator (1).
- Install the air distribution duct. Refer to Air Distributor Duct Replacement in Heating, Ventilation and Air Conditioning.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.