FixVault
Home
›
Pontiac
›
2001
›
Aztek GT, AWD
›
Repair and Diagnosis
›
External Pages
›
Different car
›
Section 152 (Supplemental Inflatable Restraint System)
›
Diagnostics
›
Connector Identification
Connector Identification
WARNING:
This page is about a different car, the 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to illustrations to identify connector terminals. See
Fig 1
-
Fig 6
.
Fig 1: Identifying Sensing & Diagnostic Module (SDM) Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 2: Identifying Driver-side Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 3: Identifying Lower SIR Coil Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 4: Identifying Passenger-side Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 5: Identifying Side Impact Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 6: Identifying Side Impact Sensor (SIS) Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 7: Identifying Front End Discriminating Sensor Connector Terminals
Courtesy of GENERAL MOTORS CORP.