Code Enable Criteria

For DTC to run, the following conditions must be met for one second:

• Engine is running.
• Engine speed is between 400-5000 RPM.
• Any change in the engine speed is less than 125 RPM.
• DTCs P0101, P0102, P0103, P0107, P0108, P0121, P0122, P0123, P0440, P0442, P0443, or P0446 are not set.
• Traction control is not active.
• A/C compressor clutch is steady.
• Power steering is stable.
• Change in idle air is less than 10 grams/second.
• Clutch switch state does not change.
• Brake switch state does not change.

DTC will set when actual MAP sensor signal is not within predicted range for 2 seconds.