FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System & Washer System › Repair Instructions › Wiper Motor Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the wiper arms. Refer to Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT .
  3. Remove the underhood electrical center. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK .
  4. Remove the cruise control module. Refer to CRUISE CONTROL MODULE REPLACEMENT .
  5. Disconnect the wiper motor cover electrical connector.
  6. Remove the wiper system drive module bolts.
  7. Remove the wiper system drive module from the engine compartment.
    Fig 1: Disconnecting Wiper Motor Electrical Connector And Removing Wiper System Drive Module Bolts
    G01721401Courtesy of GENERAL MOTORS CORP.
About FixVault