Rear Toe Adjustment

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the jam nut on the tie rod (1).

Fig 1: Adjusting Rear Toe
Courtesy of GENERAL MOTORS CORP.
Rotate the inner tie rod to the required toe specification setting. Refer to Wheel Alignment Specifications .

NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten the jam nut on the tie rod.
Tighten: Tighten the tie rod jam to 65 N.m (48 lb ft).
Check the toe setting after tightening.
Re-adjust the toe setting if necessary.