Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Air Cleaner Cover Clips

Courtesy of GENERAL MOTORS CORP.

Install the air intake duct to the MAF sensor.
Install the air intake duct to the throttle body and the air cleaner cover to the air cleaner assembly.
Latch the air cleaner cover clips (1).

Fig 2: Locating Intake Air Duct Clamps From MAF Sensor & Throttle Body

Courtesy of GENERAL MOTORS CORP.

Reconnect the MAF sensor electrical connector (2).
Reconnect the vent tube to the air intake duct.
Install the IAT sensor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten the 2 intake air duct clamps (1).
Tighten: Tighten the intake air duct clamps to 2 N.m (18 lb in).