FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 1044 (HVAC Systems - Automatic) › Repair Instructions › Recirculation Actuator Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Recirculation Actuator Mounting Screws
    GM872107Courtesy of GENERAL MOTORS CORP.
  1. Install the recirculation actuator.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the recirculation actuator mounting screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

    3. Fig 2: Locating Actuator Connector
    GM295297Courtesy of GENERAL MOTORS CORP.
  3. Connect the recirculation actuator electrical connector.
  4. Install the upper I/P trim pad. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
About FixVault