Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Position the 12-volt power supply retainer with the key to the slot into the power supply hole.

Fig 1: Aligning 12-Volt Power Supply Retainer With Power Supply Hole Slot
Courtesy of GENERAL MOTORS CORP.
Install the power supply retainer pressing into place until fully seated.

Fig 2: Pressing Power Supply Retainer Into Place
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connector to the I/P power supply receptacle.

Fig 3: Locating 12-Volt Power Supply Receptacle Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Position the power supply receptacle to the retainer.

Fig 4: Aligning Power Supply Receptacle To Retainer
Courtesy of GENERAL MOTORS CORP.
Install the power supply receptacle into the I/P, pressing into place until fully seated.

Fig 5: Installing Power Supply Receptacle
Courtesy of GENERAL MOTORS CORP.
Install the power supply fuse.
Inspect the power supply for proper operation.