FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Accessory Inflator Switch Electrical Connector
    GM873333Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (1) to the accessory inflator switch (2).
  2. Install the inflator switch in the inflator control panel.
  3. Install the lower rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower (Aztek) or Trim Panel Replacement - Rear Quarter Lower (Rendezvous) in Interior Trim.
  4. Install the inflator fill valve access cover.