FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 1070 (Suspension Control System - Suspension Leveling) › Repair Instructions › Automatic Level Control Inflator Air Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the inflator fill valve access cover.
  2. Remove the lower rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower (Aztek) or Trim Panel Replacement - Rear Quarter Lower (Rendezvous) in Interior Trim.
  3. Remove the switch from the inflator control panel.
    4. Fig 1: Accessory Inflator Switch Electrical Connector
    GM873333Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector (1) from the accessory inflator switch (2).
About FixVault