FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 1075 (Hydraulic Brake System) › Repair Instructions › Master Cylinder Fluid Level Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Master Cylinder Fluid Level Sensor
    GM241616Courtesy of GENERAL MOTORS CORP.
  1. Install the fluid level sensor (1) until the locking tabs snap into place.
  2. Connect the electrical connector to the fluid level sensor (1).
About FixVault