Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Master Cylinder Fluid Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (2) from the fluid level sensor (1).

Fig 2: Removing Brake Fluid Level Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the fluid level sensor (1). Use needle nose pliers in order to compress the switch locking tabs at the outboard side of the master cylinder.