Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of License Lamp Bezel

Courtesy of GENERAL MOTORS CORP.

Position the license lamp bezel on the liftgate.

NOTE: Refer to Fastener Notice .

Install the license lamp bezel to lift gate nuts.
Tighten: Tighten the nuts to 4 N.m (35 lb in).
Connect the license lamp electrical connector.
Install the liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement .