FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 1616 (Engine Controls And Fuel - 2.4L - Introduction) › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement 
    2. Fig 1: EVAP Canister Purge Valve Tube
    GM1571757Courtesy of GENERAL MOTORS CORP.
  2. Remove the evaporative emission (EVAP) canister purge tube from the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Reposition the EVAP canister purge tube out of the way.
  4. Disconnect and reposition the fuel injector wiring harness out of the way.
    5. Fig 2: Identifying MAP Sensor
    GM1581050Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the engine harness electrical connector from the manifold absolute pressure (MAP) sensor.
  6. Remove the MAP sensor and seal.
About FixVault