FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 1616 (Engine Controls And Fuel - 2.4L - Introduction) › Repair Instructions › Throttle Body Assembly Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Throttle Body
    GM1810824Courtesy of GENERAL MOTORS CORP.
  1. Install the throttle body assembly to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the throttle body assembly bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Connect the engine wiring harness electrical connector to the throttle body assembly.
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
About FixVault