Spark Plug Wires: Installation
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the spark plug wires to the engine. Install the spark plug wires to the ignition coils. See Figure . Install the spark plug wires (1, 3, and 5) to bank 2 spark plugs. Install the spark plug wires to the retaining clips.
- Return the engine to the proper position. Remove the engine tilter strap from the engine. Swing the engine mount struts in position. Install the engine mount strut bolts and tighten bolts to specification. See TORQUE SPECIFICATIONS .
- Install the spark plug wires (2, 4, and 6) to bank 1 spark plugs. Install the spark plug wires to the retaining clips.