Accelerator Controls Cable Bracket: Removal
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the accelerator controls cable cross slug from the throttle body lever. See Figure . Disconnect the accelerator controls cable from the accelerator cable bracket. Disconnect the cruise control cable from the throttle lever and accelerator bracket, if applicable. See Figure .
- Disconnect the air cleaner intake duct from the throttle body. See AIR CLEANER INTAKE DUCT under AIR INDUCTION SYSTEMS. Disconnect the wire harness from the retainer. Remove the nut and bolts holding the accelerator cable bracket to the throttle body. Remove the accelerator cable bracket.