FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 624 (HVAC Systems - Automatic) › Repair Instructions › Blower Motor Control Processor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the blower motor control processor (2) to the HVAC module (1).
  2. Install the blower motor control processor retaining screws. Tighten the screws to 1.6 N.m (14 lb in).
  3. Connect the electrical connector (4) to the blower motor control processor (2).
  4. Connect the electrical connector at the blower motor.
  5. If equipped, install the sound insulator panel.
About FixVault