Selector Lever Component Removal/Installation: Notes
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the battery cover.
- Disconnect the negative battery cable.
- Remove the battery, battery box and battery tray.
- Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3] .)
- Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
- Remove the heat insulator (front and center).
- Remove in the order indicated in the table.
- Install in the reverse order of removal.