FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 735 (Lighting System) › Front Side Turn Light Removal/Installation

Front Side Turn Light Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Move the front side turn light in the direction of the arrow (1) and detach the tab.
  3. Pull area A of the front side turn light in the direction of the arrow (2) and remove the front side turn light.
  4. Disconnect the front side turn light connector.
  5. Install in the reverse order of removal.
    Fig 1: Removing/Installing Front Side Turn Light
    G02566963Courtesy of MAZDA MOTORS CORP.
About FixVault