Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Cleaner Housing Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the air filter element into the lower air cleaner housing.
Install the upper housing cover and tighten the screws.
Tighten: Tighten the screws to 4 N.m (35 lb in).

Fig 2: Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the MAF/IAT sensor electrical connector (1).