FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 932 (Power Steering System) › Repair Instructions › Power Steering Pump Bracket Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power steering pump from the bracket (3). Refer to Power Steering Pump Replacement (4.3L) , Power Steering Pump Replacement (4.8L, 5.3L and 6.0L) , Power Steering Pump Replacement (8.1L) Power Steering Pump Replacement (6.6L Diesel)  or Power Steering Pump Replacement (Parallel Hybrid Truck) .
  2. Remove the positive battery junction block bracket retaining bolts (2) from the power steering pump bracket.
    Fig 1: Removing Positive Battery Junction Block Bracket Retaining Bolts From Power Steering Pump Bracket
    GM1237043Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts retaining the power steering pump bracket (3) to the engine.
    Fig 2: Removing Bolts Retaining Power Steering Pump Bracket To Engine
    GM1202281Courtesy of GENERAL MOTORS CORP.
  4. Remove the power steering pump bracket from the vehicle.
About FixVault