FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 932 (Power Steering System) › Repair Instructions › Power Steering Pump Flow Control Valve Replacement - Off Vehicle (Regular) › Assembly Procedure

Assembly Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flow control spring (4) if removed from the pump housing (1).
    Fig 1: Installing Control Valve Assembly
    GM431058Courtesy of GENERAL MOTORS CORP.
  2. Lubricate the new rectangular section seal (2) with power steering fluid.
  3. Install the rectangular section seal (2) onto the control valve assembly (3).
  4. Install the control valve assembly (3).
About FixVault