FixVault
Home › Pontiac › 2002 › Aztek AWD › Repair and Diagnosis › Restraints › Restraints Control Systems › Supplemental Inflatable Restraint System Deactivation Procedures › General Motors › Disabling & Activating Air Bag System › Activating System (Corvette)

Activating System (Corvette)

  1. Remove key from ignition switch. Ensure SDM fuse is still removed from fuse block. Connect passenger air bag 2-pin Yellow connector located at base of steering column. Install CPA clip. Repeat procedure for driver air bag 2-pin Yellow connector. Install CPA clip. Install lower steering column cover.
  2. Install SDM fuse in fuse block. Staying well away from air bag modules, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.
Fig 1: Locating Driver Air Bag Connector (Corvette)
G98H13554Courtesy of GENERAL MOTORS CORP.
About FixVault