Activating System (Eldorado)
- Remove key from ignition switch. Ensure SIR fuse is still removed from fuse block. Connect Yellow 2-pin SIR connector on right side of instrument panel compartment. Install CPA clip. Ensure wiring harness is attached to sheet metal, away from A/C mix door actuator. Install right sound insulator. Connect Yellow 2-pin SIR connector at base of steering column. Install CPA clip. Install left-side sound insulator panel.
- Install SIR fuse in fuse block. Staying well away from air bag modules, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.