Disabling System (Saturn Vue)
- Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS . Turn front wheels to straight-ahead position. Turn ignition off and remove key.
- Remove AIR BAG mini-fuse from instrument panel fuse block. Fuse block is located behind access cover on right side of center console. Remove Connector Position Assurance (CPA) clip from driver air bag Yellow 2-pin connector. Connector is clipped to steering column brace. See Figure. Disconnect Yellow 2-pin connector.
- Detach clip holding passenger air bag Yellow 2-pin connector to metal brace. Brace is near blower motor housing. See Figure. Remove CPA clip and disconnect passenger air bag Yellow 2-pin connector.
- If vehicle is equipped with curtain (head) air bags, pop center push pins located in the upper headliner trim panel. See Figure. Remove right and left "D" pillar upper trim panels. See Figure.
- Using a small flat-bladed tool, partially remove right and left coat hook center retainers, then pull on coat hooks to remove them from headliner. See Figure. Carefully pull back on headliner to gain access to right and left side curtain air bag Yellow 2-pin connectors. Remove CPA clips from both connectors. Disconnect left and right side curtain air bag Yellow 2-pin connectors. See Figure.
NOTE:
Be careful not to damage headliner when disconnecting roof rail air bag connectors.