Park/Neutral Position Switch: Removal

1. Apply the parking brake. Block the wheels. Shift the transaxle into Neutral. Remove the throttle body air inlet duct. Use a flat-blade tool in order to remove the shift cable from the manual control lever. See Fig 1 .
2. Remove the shift cable from the shift cable bracket. See Fig 2 . Remove the electrical connectors. Remove the manual control lever. Remove the PNP switch bolts. See Figure . Remove the PNP switch.

Fig 1: Removing & Installing Shift Cable At PNP Switch

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Shift Cable At Transaxle Bracket

Courtesy of GENERAL MOTORS CORP.