Removal Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (GE 47716 Fill) .
- Remove the front fascia. Refer to Front Bumper Fascia Replacement (Redline) or Front Bumper Fascia Replacement (Standard) .
- Remove the battery box inlet air duct.
- Remove the condenser radiator fan module (CRFM) closeout panel retainers from the condenser.
- Remove the CRFM closeout panel from the condenser.
- Remove the fan assembly bolts from the radiator.
- Lift the fan assembly to disengage the lower retention tabs.
- Position the fan assembly away from the radiator.
- Remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement .
- Lift the condenser while holding the upper retention tabs forward.
- Position the condenser away from the radiator.
- Disconnect the transmission cooler lines from the radiator, if equipped.
- Remove the CRFM bracket bolts from the radiator support.
- Remove the CRFM brackets from the radiator.
- Remove the radiator inlet hose clamp from the radiator.
- Remove the radiator inlet hose from the radiator.
- Remove the radiator outlet hose clamp from the radiator.
- Remove the radiator outlet hose from the radiator.
- Remove the radiator from the vehicle.
- Remove the radiator seals from the radiator.