Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the bulb into the socket.
- Install the socket into the housing turning the socket to lock it in place.
- Turn the socket and lock in place.
- Install the tail/turn signal lamp assembly to the vehicle with the screws. Tighten the tail/turn signal lamp screws to 2 N.m (18 lb in).
- Close the end gate.
- Inspect the operation.