FixVault
Home › Pontiac › 2002 › Aztek FWD › Repair and Diagnosis › External Pages › Different car › Section 664 (Power Seat System) › Repair Instructions › Seat Switch Bezel Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power seat adjuster switch assembly to the seat-switch bezel.
  2. Install the lumbar support switch to the seat switch bezel.
  3. Connect the electrical connectors.
  4. Install the screws retaining the power seat switch bezel. Tighten the screws to 2 N.m (18 lb in).
  5. Install the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement .
About FixVault