Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the recirculation actuator.

Fig 1: Installing Recirculation Actuator (Delphi)
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the recirculation actuator retaining screws.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
Connect the electrical connector to the recirculation actuator (1).

Fig 2: Identifying Electrical Connectors
Courtesy of GENERAL MOTORS CORP.
Install the air distribution duct. Refer toAir Distributor Duct Replacement .