FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System & Washer System › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Installation Procedure

Installation Procedure

  1. Position the washer solvent container level sensor and seal to the washer solvent container pressing in until fully seated.
    Fig 1: Positioning Washer Solvent Container Level Sensor And Seal
    G01517336Courtesy of GENERAL MOTORS CORP.
  2. Connect the washer solvent container level sensor electrical connector.
  3. Fill the washer solvent container with washer solvent.
  4. Close the hood.
    Fig 2: Connecting Washer Solvent Container Level Sensor Electrical Connector
    G01517337Courtesy of GENERAL MOTORS CORP.
About FixVault