FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Repair Instructions › Fan Shroud Replacement › Installation Procedure

Installation Procedure

  1. Install the heat shields to the cooling fan shroud.
    Fig 1: Installing Heat Shields To Cooling Fan Shroud
    G01500990Courtesy of GENERAL MOTORS CORP.
  2. Install the fan motors to the cooling fan shroud.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the screws to the cooling fan motor.

    Tighten 

    Tighten the screws to 6 N.m (53 lb. in).

  4. Connect the cooling fan motor electrical connectors.
    Fig 2: Installing Cooling Fan Motor And Bolts
    G01500991Courtesy of GENERAL MOTORS CORP.
  5. Install the cooling fans to the shroud.

    Important:  Turn the cooling fan nuts counterclockwise to tighten.

  6. Install the cooling fan nuts.

    Tighten 

    Tighten the nuts to 6 N.m (53 lb. in).

  7. Install the cooling fan assembly including the shroud. Refer to COOLING FAN REPLACEMENT - ELECTRIC  .
Fig 3: Installing Cooling Fan Nuts And Shrouds
G01500992Courtesy of GENERAL MOTORS CORP.
About FixVault