FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Removal & Installation › Ignition Systems › Ignition Coils › Removal & Installation

Removal & Installation

  1. Turn ignition off. Disconnect the spark plug wires from the ignition coils. Note the position from which the wires are removed. Remove the 2 screws that secure the ignition coil to the ignition control module. Remove the ignition coil.
  2. To install, reverse removal procedure. Tighten the coil screws to specification. See TORQUE SPECIFICATIONS  . Connect the spark plug wires to the ignition coils. See Fig 1 .
Fig 1: Identifying Proper Spark Plug Routing At Ignition Coils
G00114733Courtesy of GENERAL MOTORS CORP.
About FixVault